AER Compact 60/4 Tommy Emmanuel Signature

If you ever heard Tommy play, you will recognize that his sound is much more than loud and dynamic. He does not use effect pedals - his sound is a marriage between his fingers, his guitars and his amplifier.
We are very proud to create an amplifier exactly to Tommy‘s needs. To reproduce the typical ‚initiation tone‘ the on-board delay had to be slightly changed. The sound Tommy produces on-stage has to be sent exactly to the front-of-house PA system. A switchable pre/post efx DI provides the tone on and off the stage.''

Two channels with two input stages for instrument and e.g. high-quality condenser microphone.
The second channel provides 48 V phantom power. Channel one has 9-V phantom power switchable.
8" twin cone loudspeakers and 60 watts, which are a must in any rehearsal room and on club stages are completely sufficient.

• Channel 1
  6.3 mm (1/4”) input jack as high
  impedance line input with pad (high/low attenuation),
  9 V phantom power (switchable), and gain control
• Channel 2
  combined XLR/6.3 mm (1/4”)
  jack socket as high-impedance line or balanced microphone
  input, 48 V, gain control
• Equalizer
  three band tone controls for channel 1
  and
  two band tone controls for channel 2
• Colour
  ‘mid-cut-treble-boost’-filter
• Digital effect processor with 4 presets:
  2 x reverb, delay, chorus
  (Effect #3 is a delay with 213.5 beats-per-minute).
• Power amp
  60 W / 4 ohms
• Analog signal processing
  subsonic filter, adaptive peak limiter
• Speaker system
  8” (200 mm) twin-cone speaker
• Features
  headphones, line out, pre/post effect
  switchable DI-out,
  external parallel effect loop,
  footswitch (internal/external effect on/off),
  3.5 mm aux in jack socket, tuner out
• Dimensions
  260 mm x 325 mm x 240 mm
  (10.20“ x 12.80“ x 9.45“), HxWxD
• Weight
  7.1 kg (15.6 lbs)